FieldInstruments.in

General

The high performance differential pressure transmitter model EJA110A can be used to measure liquid, gas, or steam flow as well as liquid level, density and pressure. It outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Model EJA110A also features remote setup and monitoring through communications with the BRAIN™ terminal and CENTUM CS™ or XL™ or HART® 275 host.

Specifications

• Make : YOKOGAWA
• Model: EJA110A-EMS4B-92EA/FF1/D1
• Output Signal: -E - 4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
• Measurement span (capsule): M - 1 to 100 kPa {100 to 10000 mmH2O} {4 to 400 inH2O} {10 to 1000 mbar}
• Wetted parts material1: S# - [Body]2 SCS14A; [Capsule] SUS316L3; [Vent plug] SUS3164
• Process connections: 4 - with 1/2 NPT female process connector
• Bolts and nuts material: B -  SUS630; [Maximum working pressure] 16 MPa {160 kgf/cm2}5
• Installation: *-9 - Horizontal impulse piping type, left side high pressure6
• Electrical connection: *2 - 1/2 NPT female, two electrical connections without blind plug
• Integral indicator: E - Digital indicator with the range setting switch7
• Mounting bracket: *A - SECC Carbon steel; 2-inch pipe mounting (flat type)

FieldInstruments.in
Xelexon India (Pvt) Ltd, 502 Neeta CHSL, C wing, Tejpal skim road no. 5,
Vile parle East Mumbai, Mumbai, India, 400057.
Phone: +91 79770 90143
WhatsApp: +91 79770 90143
Email: fieldinstruments@xelexon.com